If you want to update your home with new flooring, vinyl is a great option. It’s easy to install and comes in various colors and styles to fit your home’s decor.
Here’s How To Lay Vinyl Flooring:
- Prepare the Necessary Equipment and Materials.
To get started, you will need a trowel, oscillating multi-tool, putty knife, manual screwdriver, utility knife, cordless drill, and tape measure. As for materials, you will need vinyl sheet flooring, pre-mixed floor patch and level compound, and double-sided flooring tape.
- Take Out Obstacles
You need to take out any obstacles that may be in the way. This includes furniture, rugs, and anything else blocking the path. Once you have a clear path, you can start measuring and cutting the vinyl to fit the space.
- Get the Subfloor Ready.
Start by cleaning the subfloor. If there is any debris or dirt on the surface, it will need to be removed before you can proceed. Once the subfloor is clean, you’ll need to level it off. This can be done with a self-leveling compound or by sanding it down. This will help ensure that the vinyl flooring is properly installed and that it will last many years.
- Slice Through the Door Trim
It is very important to remove the door trim before you install vinyl flooring. Otherwise, you will have a very difficult time getting the vinyl to lay flat against the doorframe.
- Cut the Flooring Sheet.
Measure the area where you’ll be installing the vinyl flooring. Then, score the vinyl flooring sheet along your measurement using a straight edge. Be sure to score it deeply enough that the vinyl can be easily snapped apart.
- Make Cuts for Relief
When cutting vinyl flooring, always make sure to use a sharp knife or scissors. You’ll also want to make cuts for relief, which will allow the vinyl to expand and contract without damaging the floor.
- Round the Sides Off
You’ll need to round the sides off of your vinyl flooring so that it lays flat and looks professional.
- Include Adhesive Tape
Adhesive tape is necessary to keep the vinyl in place and to prevent it from shifting. Without it, the vinyl may not adhere properly to the subfloor and could start to peel up over time. To install the vinyl flooring, you will need to use an adhesive. Spread the adhesive evenly over the area where you will be installing the vinyl flooring.
- Lay the Vinyl Flooring in Place
You’ll need to start in one corner and work your way out. It’s important to take your time and lay the vinyl down smoothly, so there are no wrinkles or bubbles. Once you’ve laid the vinyl down, you can use a roller to smooth it out and get rid of any air pockets.
Vinyl flooring in Singapore is becoming increasingly popular for both residential and commercial properties. There are many reasons for this, including the fact that it is easy to install, maintain, and clean. In addition, vinyl flooring is available in a wide range of colors and designs to suit any taste.
Conclusion:
It’s important to take time when laying vinyl flooring to ensure it’s flat and level. You may have to review the stippled pattern several times to ensure you get full coverage, but don’t worry; it’s normal. If you have trouble getting the last piece to fit, you should place some thin strips of wood under it to help hold it in place.